Gemini starter motor conversion

 :: mods :: How To

View previous topic View next topic Go down

Gemini starter motor conversion

Post  ausmini on 4th May 2013, 03:54

Here is a really good write up on moke.com.au on how to fit a pre-engaged gemini starter motor to the A-series.

The advantage of a pre-engaged is that the gear doesn't have to fly out and smack the flywheel ring - also no chance of sticking. It also engages on the opposite, non worn, side of the flywheel ring to the standard mini starter.

Essentially you get a starter from a 75 to 84 RWD Holden Gemini models: TX, TC, TD, TE, TF, TG, eloTo do it you egate the mounting hoes and wire it up. Very cool.

You can find it here: moke.com.au/in-the-garage/modifications/91-fitting-a-gemini-starter

ausmini

Posts : 2
Join date : 2013-05-04
Location : Melbourne Victoria

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 :: mods :: How To

 
Permissions in this forum:
You cannot reply to topics in this forum